CasaTunes 2 x 50W Stereo Amplifier

This product is currently out of stock. Please order CT-2100A or contact sales for availability.

CasaTunes 2 x 50W Stereo Amplifier

Stereo Amplifier

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

MODEL:

CT-250A

PRICE:

Buy Now

Streams

Zones

CHANNELS

Sources

50W

Power

Disc (GB)

✓

WiFi

*Optional

The CasaTunes CT-250A is a 2-channel class D power amplifier featuring a stereo speaker output with support for 4-ohm and 8-ohm speakers. The amplifier can deliver 50 watts per channel into 8-ohms, or 65 watts into 4-ohm loads. The amplifier can be configured to be always on, to turn on when an audio signal is detected, or powered on using a trigger signal.

The CasaTunes CT-250A is the perfect companion product for powering Zones 7 & 8, the two pre-amplified outputs on the CT-12X8 matrix amplifier. For better reliability and maximum power savings (≤ 0.5 watts in standby mode), use the trigger out (AMP ON) capabilities of the CT-12X8MA to turn the amplifier in and out of standby mode when the zone is powered off and on, respectively. A trigger cable is included with the amp.

The amplifier includes both thermal and short circuit protection.

The CT-250A ships with rack mount hardware, and can be mounted in a rack either as a single unit, or two units can be mounted side-by-side.

Class-D amplifier providing 50 watts/channel (RMS) into 8 ohm loads or 65 watts/channel into 4-ohm loads
Bridgeable output provides 120 watts into a single 8-ohm load
4-pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire
12-volt trigger input for power-on/off
12-volt trigger output for controlling other devices
Buffered loop output of original signal for connecting additional amplifiers
Rear panel volume gain adjustment
Built-in thermal and short circuit protection circuits
Includes rack-mount ears for mounting a single unit, or two units side-by-side
Includes trigger cable to connect to CT-12X8MA

Audio Inputs: Stereo Analog RCA
Audio Outputs: Buffered stereo analog RCA loop output
Output Power: 50 watts per channel into 8 ohms , or 65 watts per channel into 4 ohms, or 120 watts into a single 8 ohm load
Minimum Output Impedance: 4 ohms in stereo mode, 8 ohms in mono bridged mode
Total Harmonic Distortion plus Noise (THD+N): <0.1% for all modes
Trigger Input: 12 VDC, 10 kΩ
Trigger Output: 12VCD, 100mA
Input Power: 100 - 240 VAC, 50/60Hz, 2.5A
Standby Power Consumption: ≤ 0.5 watts
Dimensions: 8.5” x 10.5” x 1.8” (216 x 267 x 45 mm)
Shipping Weight: 5.5 lbs

CasaTunes CT-250A Manual

Downloads

Download CT-250A PDF Manual

Gallery

No items found.