Is it possible to control an Onkyo FM tuner via the Casatunes interface by leveraging an IR emitter connected to a CAM6.6? I am pretty sure that I can configure the keypads and CAM6.6 itself to control the tuner but I’m not sure if the control can extend back to the CasaTunes interface.

If so then I dont need to buy a Russound ST2!

I would not recommend it.  It is really best to have two way communications via a serial interface.  In addition to the Russound tuners, we also support the ONKYO T-4555 which is a single tuner, but includes AM/FM/HD and optional XM and/or Sirius.

Is there a list of all the devices you support? I didnt see a list readily availble.

The CasaTunes Setup and Trouble Shooting Guide in the How To Documents contains a section at the end of the document that includes the device list.

DK - 24 March 2010 05:06 PM

The CasaTunes Setup and Trouble Shooting Guide in the How To Documents contains a section at the end of the document that includes the device list.

Thanks! I checked this out but it only lists Nuvo, CasaTunes, and Russound devices.

nexus99 - 24 March 2010 05:16 PM

DK - 24 March 2010 05:06 PM

The CasaTunes Setup and Trouble Shooting Guide in the How To Documents contains a section at the end of the document that includes the device list.

Thanks! I checked this out but it only lists Nuvo, CasaTunes, and Russound devices.

I ran through the setup again and I was able to pull all of the supported devices from there. Now just to wait for one of the to show up on eBay for a reasonable price! Looks like the Onkyo is the only one that does HD radio though.

Sorry, we are in the process of updating this information. Here is the latest list of tuners supported by CasaTunes:
Arcam T32 AM/DAB/FM/Sirius
The full line of Nuvo T2 tuners (AM, FM, DAB, Sirius, XM, Weatherband)
Onkyo T-4555 AM/DAB/FM/Sirius/XM
Russound AM/FM
Russound XM
Russound Sirius