CasaTunes Forum

RTI Drivers

2012-01-13T13:32:52-07:00

Is there a driver available for RTI control systems? If not, is it on the roadmap?

Casatunes Drivers

2012-01-10T14:31:17-07:00

Any chance you will be looking at creating drivers for casatunes to integrate with URC’s new Total Control IP products? I am planning on moving to their new total control platform and it would be nice not to have to buy their streaming network player for complete integration. It would also give URC clients control of Casatunes via the remotes.

Bitwise vs. Global cache

2012-01-07T02:20:48-07:00

I am wanting to learn more about the integration with bitwise but I prefer global cache hardware. Can the same thing be programed using one of global cache’s software partners for whole home control such as command fusion?

CasaTunes and Crestron

2009-10-20T00:24:25-07:00

how about integrating casaTunes to be part of any automation system?
will happen anytime soon?

thx

Integra

2011-08-31T15:43:15-07:00

hi, I have been playing around with the Intega 3rd party control which works great for the main zone. But I am having difficulty getting the correct hex for zone 2, 3 and 4. Can you possibly assist?

ISY integration

2011-08-22T11:11:02-07:00

ISY’s becoming a great unit, with their network module it can call/post to webservices, has anyone done anything with this yet.

I was looking at ISY->Russound but frankly that’s only 1/2 the puzzle, controlling via casatunes will give alot more power around source control, etc..

thoughts ?

Casatunes with Nevo s70

2011-03-19T21:58:22-07:00

Any plans to intergrate the Nevo S70 with Casa tunes like the Phillips Pronto scrip. Can this remote in any way work with Casa tunes.

Casatunes & Nuvo controlled by ControlFX on ipad

2011-01-12T08:58:22-07:00

Hi All,

i have installed controlFX software on my ipad
the video on this page shows the interface

http://www.controlfx.co.uk/Overview/c2/p2/ControlFX_Overview/pages.html

i have chosen this software as they are about to release a module to integrate dynalite lighting control and i am a dealer for this brand in my region, i am also selling nuvo, casatunes and vidaox equipment.

Connection of the controlFX software to the nuvo is using an ethernet to rs232 control server and this now complicates things

would the following type of connection get around the single rs232 port issue?
(from what i understand a 2 into 1 rs232 setup will not communicate properly)

1. connect casatunes server to an ‘ethernet to rs232 control server’ (via a nuvonet adapter?)
2. connect the nuvo to another “ethernet to rs232 control server’
3. not forgetting the cat 5 cable from nuvonet adapter to grand concerto

i have read the ‘casatunes serial interface’ document and all control appears to be possible although a little time consuming to set up
but i didnt see anything about metadata which is why i was wondering if the nuvonet adapter was used would this still make casatunes act as a nuvo source even in this configuration?

the plan is to recess wall mount the ipads to replace both the nuvo wall controllers and the dynalite lighting controllers

any comments, thoughts or sugestions would be highly appreciated

Casatunes and URC

2011-01-05T12:46:45-07:00

Are you working on a two-way module for the URC remotes?

CasaTunes and mControl

2010-08-30T10:57:23-07:00

Is there a way to configure CasaTunes and/or mControl to enable a user to launch CasaTunes from within a specific zone in the zone view of mControl such that when CasaTunes starts it has that zone already set?